Go to content
Skip menu
Skip menu

Panama MMC-359 – ISPS Code Implementation and Certification Requirements


The Panama Maritime Authority Merchant Marine Circular MMC-359 establishes the requirements and procedures for the implementation and certification of the International Ship and Port Facility Security (ISPS) Code on Panamanian-flagged vessels. It defines the responsibilities of Company Operators, Company Security Officers (CSOs) and Recognized Security Organizations (RSOs), covering security verification, SSAS testing, certificate issuance, transfer of certification and compliance requirements. MMC-359 supersedes MMC-368 and provides the regulatory framework for maintaining ISPS certification under the Panama flag.

Panama MMC-359: Guidance for the Implementation and Certification of the ISPS Code

The Panama Maritime Authority has issued Merchant Marine Circular MMC-359, providing guidance on the implementation, verification and certification of the International Ship and Port Facility Security (ISPS) Code for Panamanian-flagged vessels. The circular establishes administrative requirements and clarifies the responsibilities of ship operators, Company Security Officers (CSOs) and Recognized Security Organizations (RSOs).

Panama Maritime Authority – Merchant Marine Circular MMC-359

The Panama Maritime Authority (PMA), through its General Directorate of Merchant Marine and Control and Compliance Department, issued Merchant Marine Circular MMC-359 concerning the implementation and certification of the International Ship and Port Facility Security Code (ISPS Code).

The circular is addressed to Recognized Security Organizations (RSOs), Operators and Company Security Officers (CSOs) and provides information concerning the Administration's requirements, policies and interpretations regarding the application of the ISPS Code.

MMC-359 supersedes MMC-368 and consolidates the Panama Administration's guidance concerning security verification, certification, responsibilities, reporting and the administration of International Ship Security Certificates (ISSCs).

Issuing Authority

Panama Maritime Authority – General Directorate of Merchant Marine, Control and Compliance Department.

Circular Reference

Merchant Marine Circular MMC-359, dated 29 May 2025, superseding MMC-368.

Subject

Guidance for the implementation and certification of the International Ship and Port Facility Security Code.

Applicable Parties

Recognized Security Organizations, ship operators, Company Security Officers and other relevant parties.

Regulatory References

  • Law No. 7 of 27 October 1977, adopting the SOLAS Convention.
  • Resolution No. 106-107-DGMM of 9 October 2017.
  • SOLAS Chapter XI-2 – Special Measures to Enhance Maritime Security.
  • International Ship and Port Facility Security (ISPS) Code.
  • Resolution MSC.198(80) of 20 May 2005.
  • Panama Merchant Marine Circulars MMC-123, MMC-133, MMC-136, MMC-183, MMC-346 and MMC-399.

Applicability of the ISPS Code to Panamanian-Flagged Vessels

Under paragraph 4.1 of MMC-359, the ISPS Code applies to all Panamanian-flagged vessels engaged on international voyages of 500 gross tonnage and upwards, in accordance with the applicable requirements of SOLAS Chapter XI-2 and Part A of the ISPS Code.

The circular also addresses Panamanian-flagged vessels operating in international jurisdictional waters or on international coastal voyages. Such vessels must follow the national regulations of the country in which they operate to comply with the ISPS Code.

International Voyages

Panamanian-flagged vessels of 500 GT and upwards engaged on international voyages fall within the stated scope of MMC-359.

International Jurisdictional Waters

Vessels operating in international jurisdictional waters must observe the national regulations of the country where they are operating.

International Coastal Voyages

Applicable national requirements of the country of operation must also be followed.

Administration Requirements

Operators must ensure that the applicable ISPS verification and certification arrangements remain valid throughout the vessel's operation.

Responsibilities of Ship Operators and Companies

Paragraph 4.2 of MMC-359 establishes specific responsibilities for the Company Operator concerning the designation of the Company Security Officer, coordination of security verifications and maintenance of the vessel's certification status.

Company Operator Requirements

  • Designate a Company Security Officer (CSO) responsible for security-related matters.
  • Ensure that the CSO holds a Declaration of Company Security Officer duly endorsed by the Panama Maritime Authority before initial, intermediate or renewal verification.
  • For vessels entering the Panamanian Registry, schedule the first annual Ship Security Alert System (SSAS) test through the new platform.
  • Ensure that the CSO schedules the next SSAS test every 12 months.
  • Maintain proper communication with the appointed RSO to complete the ISPS verifications within the established windows under ISPS Code Part A/19.1.
  • If verification cannot be completed within the established window due to special circumstances, submit the relevant application before expiry of the applicable certificate through the Panama Administration's online platform.
  • Following successful initial or renewal verification, apply for the Full Term International Ship Security Certificate through the E-Segumar platform.

The Full Term ISSC is issued exclusively by the Panama Maritime Authority. Operators must ensure that the application is completed to avoid the vessel navigating without a valid certificate.

Company Security Officer (CSO) Responsibilities

Under paragraph 4.3 of MMC-359, the Company Security Officer is the direct contact point between the operating company and the Panama Maritime Authority in matters concerning implementation of the ISPS Code.

CSO Declaration

Obtain the Declaration of Company Security Officer duly endorsed by the Panama Maritime Authority before the relevant ISPS verification.

Ship Security Plan

Ensure that the CSO's name and contact details are identified in the Ship Security Plan (SSP).

Changes of CSO

When the CSO or alternative CSO changes, the Ship Security Plan must be amended to reflect the updated details.

Continuous Synopsis Record

Ensure that the CSR is requested once the vessel is flagged and updated whenever relevant changes occur.

ISPS Verification Coordination

Coordinate all ISPS verifications with the appointed RSO within the applicable verification windows.

Annual SSAS Testing

Schedule the annual Ship Security Alert System test in accordance with MMC-133.

The updated CSO information must be reflected in the relevant security documentation and the endorsed declaration must remain available on board.

Responsibilities of Recognized Security Organizations (RSOs)

Paragraph 4.4 establishes the obligations of RSOs acting on behalf of the Panama Maritime Administration. RSOs must coordinate with Company Operators and ensure that all required ISPS verifications are completed within the applicable verification windows.

Verification and Documentation Requirements

  • Verify that the CSO designated by the Company Operator holds a Declaration of Company Security Officer duly endorsed by the Panama Maritime Authority.
  • Verify that the vessel has an updated Continuous Synopsis Record before completing intermediate and renewal ISPS verifications.
  • Raise a minor failure where the CSR is not available on board or is not updated, as specified in paragraph 4.9.7.
  • Include the CSR number and date of issue in the verification report where the document is available.
  • Check that SSAS equipment is configured to [email protected] in accordance with MMC-133.
  • Verify confirmation of the annual SSAS test issued by the Flag Administration during initial, intermediate and renewal verification.
  • Ensure that the next annual SSAS test is scheduled every 12 months.
  • Follow the prescribed procedures for transfers of ISPS certification between RSOs.

Reporting After Intermediate Verification

The RSO that performs an intermediate verification must submit a copy of the verification report and the duly endorsed ISSC to the Panama Maritime Authority at [email protected].

The circular specifies that this submission must be made as soon as possible and no later than 30 days after the verification date. Failure to comply is considered bad practice.

Where an Interim ISSC is suspended or withdrawn by an RSO, the Administration must be notified at [email protected] and [email protected].

Restrictions Applicable to Recognized Security Organizations

Paragraph 4.5 of MMC-359 defines important restrictions on the authority of RSOs acting on behalf of the Panama Maritime Administration.

RSOs are not permitted under any circumstances to:

Consecutive Interim ISSCs

Issue a consecutive Interim International Ship Security Certificate.

Short-Term Certification

Issue a Short-Term Certificate following completion of initial verification, except in the circumstances specifically described in paragraphs 4.8.3 and 4.10.2.

Full Term ISSC

Issue the Full Term International Ship Security Certificate, which is issued exclusively by PMA.

Security Level

Set the applicable maritime security level.

These restrictions distinguish the certification authority of the Panama Maritime Administration from the verification and endorsement functions delegated to recognized organizations.

ISPS Verification Report – Mandatory Information

Paragraph 4.6 requires each vessel to undergo the applicable verification under Section 19.1 of Part A of the ISPS Code. The RSO's verification report must contain the information specified by the Panama Administration.

Minimum Verification Report Contents

  • Place and date of the ISPS verification.
  • Identification of the audit team.
  • Type of verification: interim, initial, intermediate, renewal or additional.
  • Audit plan.
  • Name of the Company Security Officer (CSO).
  • Identification of the Ship Security Officer (SSO).
  • Number and date of issue of the latest Continuous Synopsis Record.
  • Date of the annual SSAS test.
  • Observations and possible required actions.
  • Recommendations.
  • Conclusion of the verification.

The report must also properly document major non-conformities that compromise the security of the vessel, cargo or crew. Such findings must be reported to the CSO and the Maritime Ships Security Department at [email protected].

Failures of security equipment or systems, or suspension of security measures that do not compromise the vessel's ability to operate at security levels 1 to 3, must nevertheless be reported without delay.

The report must identify the equivalent alternative security measures being applied until rectification and include an action plan specifying the expected timing of repair or replacement.

Types of ISPS Verification and Applicable Windows

MMC-359 identifies five types of ISPS verification. Ship operators and CSOs must ensure that the applicable verification is arranged within the prescribed time limits.

Interim Verification

A short period is allowed for implementation of ISPS requirements on newly operated vessels. The RSO must verify compliance with the applicable interim requirements.

Initial Verification

Conducted when the vessel is required to demonstrate compliance with ISPS Code Part A/19.1 before issuance of the certificate for the first time. It must be completed within the validity of the Interim ISSC.

Intermediate Verification

At least one intermediate verification must take place between the second and third anniversaries of the Full Term ISSC issuance date. This window cannot be extended or postponed.

Renewal Verification

Conducted at intervals not exceeding five years. The verification should take place within three months before or after the certificate expiry date, subject to the applicable ISPS Code provisions.

Additional Verification

Conducted at the request of the Administration, Port State Control authorities or in the cases identified under paragraph 4.11.2.

Initial Verification – Extension of Interim ISSC

Where special circumstances prevent completion of initial verification within the validity of the Interim ISSC, the operator, owner, RSO or legal representative must apply before the certificate expires through the E-Segumar platform.

The application must include:

  • A statement from the RSO explaining why verification could not be performed and specifying the exact date and place of the planned verification.
  • A copy of the Interim ISSC.
  • The Company's Document of Compliance Certificate.

The Administration will verify that the vessel maintains a valid Conformance Test Report (CTR) when the application is received.

Intermediate Verification – Important Restriction

The intermediate verification must be completed between the second and third anniversaries of the Full Term ISSC. The verification window cannot be extended or postponed. Following successful completion, the RSO endorses the Full Term ISSC.

Where the intermediate verification cannot be conducted within the window, the RSO must submit a statement explaining the circumstances and the attending confirmation email to the Administration.

Renewal Verification and Certificate Validity

Paragraph 4.7.4 of MMC-359 establishes the renewal verification arrangements, with certification intervals not exceeding five years.

The renewal verification should normally be carried out within three months before or after the expiry date of the existing certificate, subject to the specific provisions of ISPS Code Part A/19.3.

Within Three Months Before Expiry

The new certificate is valid from the completion date of the renewal verification to a date not exceeding five years from the expiry date of the existing certificate.

After Existing Certificate Expiry

Where renewal verification is completed after expiry, the new certificate is valid from the completion date, not exceeding five years from the previous expiry date.

More Than Three Months Before Expiry

Where verification is completed more than three months before expiry, the new certificate validity is calculated from the completion date and must not exceed five years.

Completion and Application

The RSO endorses the existing Full Term ISSC following successful renewal verification. The Company Operator must immediately apply for the new Full Term ISSC through E-Segumar.

The circular also addresses situations where a vessel's certificate expires while the vessel is not at a port where verification can take place. The Administration may extend the certificate under ISPS Code Part A/19.3.5, subject to the required application and RSO confirmation of the exact verification date and location.

After the applicable three-month period, the RSO must not issue certification to the vessel, whether or not renewal verification has been completed.

Types of International Ship Security Certificates (ISSC)

MMC-359 identifies four certificate categories and establishes the conditions under which they may be issued.

1. Interim ISSC

Issued in accordance with ISPS Code Part A/19.4.1 and 19.4.2 for a vessel without a certificate, upon delivery or before entry or re-entry into service, following a change of flag, or when a company newly commences management. Validity must not exceed six months.

2. Full Term ISSC

Issued exclusively by the Panama Maritime Authority after successful initial or renewal verification. Its validity may extend up to five years. The original certificate must remain on board.

3. Short Term ISSC

Used in the circumstances specified in paragraphs 4.8.3 and 4.10.2, including certain changes affecting the Full Term ISSC. Its validity must not exceed one month.

4. Conditional Certificate

Issued by the RSO only with prior Administration authorization in exceptional circumstances. The validity must not exceed 90 days and the certificate must be reported to PMA.

The Conditional Certificate is evaluated on a case-by-case basis by the Maritime Ships Security Department and is subject to the conditions specified in paragraph 4.8.4. The exceptional circumstances must not represent danger to the vessel or persons on board or an unreasonable threat of environmental harm.

Copies of Conditional Certificates must be sent by the RSO to [email protected] and [email protected].

Major and Minor Security Failures

Paragraph 4.9 of MMC-359 establishes specific reporting and corrective-action requirements for security-related failures and non-conformities.

Security Equipment and System Availability

Security equipment specified in the Ship Security Plan must always remain operational.

The RSO must verify that the Ship Security Alert System (SSAS) and Long-Range Identification and Tracking (LRIT) equipment are functioning properly and that the vessel maintains a valid Conformance Test Report in accordance with MMC-133 and MMC-195.

Non-functioning SSAS or LRIT equipment is considered a major failure.

Major Failure

Must be reported immediately to the Panama Maritime Authority, the Port Facility Security Officer (PFSO) and competent authorities of relevant coastal States.

Immediate Corrective Action

Immediate action is required to restore compliance. A major failure must be downgraded before departure under the applicable provisions.

Additional Verification

An additional verification must be carried out within an agreed period to confirm effective implementation of corrective actions.

Minor Failure

Must be reported without delay to PMA, with details of alternative security measures and an action plan specifying the timing of repair or replacement.

Major Failure – Certification Implications

Following a major failure, the RSO must take the applicable corrective and reporting actions. For intermediate or renewal verification, the ISSC is endorsed after the major failure has been downgraded as required.

In the case of initial verification, the RSO must request a Conditional Certificate in accordance with paragraph 4.8.4.

Minor Failure – Reporting Requirements

  • Report the minor failure without delay to PMA.
  • Describe equivalent alternative security measures applied on board.
  • Identify the failure or suspended security measure.
  • Provide an action plan identifying the expected repair or replacement timing.

ISPS Certification and Conformance Test Report Requirements

Paragraph 4.10 provides additional guidance concerning the issuance of Interim and Full Term International Ship Security Certificates.

The Interim ISSC may be issued following verification by the RSO in accordance with ISPS Code Part A/19.4 for the following circumstances:

  • A vessel without a certificate, on delivery or before entry or re-entry into service.
  • A change of flag.
  • When a company newly commences management of the vessel.

Full Term ISSC – Administration Issuance

After successful completion of initial verification, the Company Operator must apply for the Full Term ISSC through the Panama Administration's E-Segumar platform. The Full Term ISSC is issued only by the Panama Maritime Authority.

The vessel type stated in the Full Term ISSC must correspond to the vessel type indicated in the Safety Management Certificate issued by the Recognized Organization.

Conformance Test Report – Effective 15 March 2025

A particularly important requirement introduced in paragraph 4.10.5 is that, starting 15 March 2025, a valid Conformance Test Report must be presented for the issuance of the International Ship Security Certificate (Full Term ISSC), in accordance with MMC-195.

SSAS

The Ship Security Alert System must be operational and its configuration must comply with the applicable Panama Administration requirements.

LRIT

The Long-Range Identification and Tracking equipment must function properly and be supported by the applicable valid Conformance Test Report.

Operators and CSOs should ensure that the required Conformance Test Report is available before submitting the application for Full Term ISSC issuance.

Authorization for Additional ISPS Verification

Paragraph 4.11 distinguishes between additional verification cases that do not require prior authorization and cases for which authorization must be obtained through the Administration's online platform.

Cases Not Requiring Prior Authorization

  • Change of vessel name.
  • Change of tonnage.
  • Change of vessel type.
  • Port State Control detention, subject to immediate submission of the PSC report and audit report to PMA.
  • Flag State detention.

Cases Requiring Additional Authorization

  • Single-voyage authorization.
  • Closure of non-conformities.
  • SSAS malfunction authorization.
  • Replacement of SSAS equipment.

Where additional verification is successfully completed, the Full Term ISSC must be endorsed by the RSO.

Transfer of ISPS Certification Between Recognized Organizations

Paragraph 4.12 establishes the procedure to be followed when a shipowner or Company Operator changes the RSO responsible for the vessel's ISPS certification.

  • The RSOs must notify the Panama Maritime Authority of the change at [email protected].
  • The prescribed Notification Form for Transfer of ISPS Certification must be completed.
  • Following successful verification, the surveyor or auditor of the gaining RSO must endorse the existing ISSC on board.
  • The existing certificate does not need to be reissued by the Panama Maritime Authority solely because the RSO has changed.
  • The gaining RSO must send the verification report and duly endorsed ISSC to [email protected] immediately following completion.

Where the transfer takes place during the initial, annual, intermediate or renewal verification window, the applicable procedures under Annex 1 of MMC-359 must be followed.

Notification and Invalidation of International Ship Security Certificates

Paragraph 4.13 distinguishes the authority for invalidating Interim ISSCs from that applicable to Full Term ISSCs.

An Interim ISSC may be invalidated by determination of the RSO. A Full Term ISSC may only be cancelled by the Panama Maritime Authority through notification to the Administration.

Circumstances Affecting Certificate Validity

  • Failure to undergo the required initial, intermediate or renewal verification.
  • When the Company ceases managing the vessel.
  • When the vessel changes flag.
  • When a Full Term ISSC is issued to replace an Interim ISSC.
  • When the Company requests withdrawal of the vessel from the ISPS Register.
  • When a part of the Ship Security Plan requiring approval upon amendment is changed without the required approval.
  • When corrective actions for identified non-compliance are not completed within the agreed period.
  • When the vessel is not operated in compliance with the applicable requirements.
  • When the vessel fails to maintain its Ship Security Plan in compliance with the ISPS Code.
  • Other circumstances identified by the RSO in accordance with the applicable requirements.

Operators must therefore ensure that the Ship Security Plan remains current and that all applicable verification and corrective-action requirements are completed within the established time limits.

Vessels Out of Service for More Than Six Months

Paragraph 4.14 addresses vessels that have remained out of service for more than six months and subsequently re-enter service.

In such circumstances, an Interim Verification is required in accordance with ISPS Code Part A/19.4.2.

The applicable procedure described in Annex 1, Scenario 14 of MMC-359 must also be followed.

Shipowners and operators should therefore consider the vessel's ISPS certification status and applicable verification arrangements before planning its return to commercial operation.

Harmonization of ISM and ISPS Certification

The Panama Maritime Authority recognizes harmonized ISM and ISPS audits and verifications.

According to paragraph 4.15, harmonization reduces the number of auditor and inspector visits on board, saving time and personnel resources while maintaining the required regulatory compliance.

ISM Verification

The Safety Management Certificate (SMC) is issued following the applicable ISM audit and verification arrangements.

ISPS Verification

The International Ship Security Certificate is processed under the applicable ISPS verification and certification arrangements.

Upon successful completion of a harmonized audit and verification, the SMC and ISSC will have the same issuance and expiry dates.

The Company Operator must apply for the Full Term ISSC in accordance with the procedure identified in Annex 1, Scenario 17.

Changes During the Validity of ISPS Certificates

Paragraphs 4.16 and 4.17 specify the procedures for changes affecting vessel and operator information during the validity of Interim and Full Term ISSCs.

Changes During Interim ISSC Validity

The RSO must reissue the Interim ISSC with the same validity as the existing certificate when any of the following changes occur:

  • Change of vessel name.
  • Change of tonnage.
  • Change of the name or physical address of the operating company.
  • Change of vessel type.

Changes During Full Term ISSC Validity

Where the following changes occur during the validity of a Full Term ISSC, the RSO must issue a Short Term ISSC valid for one month. The Panama Maritime Authority will subsequently reissue the Full Term ISSC with the same validity as the existing certificate.

  • Change of vessel name – Annex 1, Scenario 4.
  • Change of tonnage – Annex 1, Scenario 5.
  • Change of vessel type – Annex 1, Scenario 6.
  • Change of operator company name or physical address – Annex 1, Scenarios 7 and 8.

ISSC Revalidation Following Reflagging

Paragraph 4.18 addresses situations where a vessel is cancelled from the Panamanian Registry and immediately reflags again.

In these circumstances, the Company Operator must request reissuance of the Full Term ISSC through the E-Segumar platform by selecting the option ISSC Revalidation for Reflagging.

The request is evaluated and processed by the Maritime Ships Security Department in Panama.

The previous certificate automatically becomes invalid when the vessel is cancelled from the Panamanian Registry. Consequently, the Company Operator must apply immediately for reissuance of the Full Term ISSC.

The relevant procedure is identified in Annex 1, Scenario 21.

SSAS Exemption Certificate

Paragraph 4.19 establishes the procedure for requesting an exemption from the Ship Security Alert System requirements.

The application must be submitted through the Panama Administration's online platform and supported by the documentation specified in MMC-359 and MMC-123.

Required Supporting Documentation

  • Statement issued by the RSO describing the alternative security measures available on board.
  • Formal statement from the Coastal State concerning the vessel's operational area.
  • Interim ISSC.
  • Payment receipt for US$300.00.

The circular specifies that no handling fee is applicable to the stated US$300.00 payment.

Printing and Onboard Retention of ISPS Certificates

Paragraph 4.20 provides printing instructions for the ISSC, ISPS Authorization and SSAS Exemption Certificate. The relevant documents must remain on board the vessel.

International Ship Security Certificate

Must be printed in dual-page format on Letter size paper (8.5 × 11 inches) or A4 if Letter size is unavailable.

ISPS Authorization

Must be printed on a single page using Letter size or A4 paper.

SSAS Exemption Certificate

Must be printed on a single page using Letter size or A4 paper.

Printing Format

All three documents may be printed in black and white or in colour and must remain available on board.

Practical Implications for Shipowners and Technical Managers

MMC-359 places significant emphasis on coordination between the Company Operator, CSO and RSO. Compliance therefore requires continuous attention to security documentation, certification validity, equipment availability and verification scheduling.

From a technical management perspective, the following areas deserve particular attention:

Certification Monitoring

Maintain a structured record of Interim, Full Term, Short Term and Conditional ISSC validity, including the applicable verification windows.

Security Equipment

Monitor SSAS and LRIT functionality, ensure valid Conformance Test Reports and maintain the operational condition of security equipment specified in the SSP.

Security Documentation

Maintain the current Ship Security Plan, CSO declaration, Continuous Synopsis Record and other required security documentation.

Verification Coordination

Coordinate with the RSO well in advance of intermediate and renewal verification deadlines.

Corrective Actions

Ensure that security-related deficiencies and non-conformities are properly reported, corrected and closed within agreed periods.

Company and Vessel Changes

Inform the RSO and Administration when changes affect the vessel's identity, operator details, certification or security documentation.

Particular attention should be given to the intermediate verification window, which cannot be extended or postponed, and to the requirement for a valid Conformance Test Report when applying for a Full Term ISSC.

PAMS Technical Commentary – ISPS Compliance and Certification Readiness

MMC-359 reinforces the importance of maintaining an effective and continuously monitored ship security management framework. Although the CSO and RSO have clearly defined security-related responsibilities, the Company Operator remains responsible for ensuring that the required arrangements are implemented and maintained.

From an independent marine technical consultancy perspective, the most important practical considerations are not limited to the date of the next ISPS audit. They also include the operational availability of security equipment, the integrity of the supporting documentation and the timely completion of corrective actions.

Particular attention should be given to SSAS and LRIT functionality, the availability of valid Conformance Test Reports, the accuracy of the CSR, the current CSO declaration and the consistency of the Ship Security Plan with the vessel's actual operating arrangements.

Shipowners and technical managers should incorporate ISPS certification monitoring into their wider regulatory compliance and vessel management systems, ensuring that the necessary verification and certification activities are planned before the relevant deadlines.

Independent technical assessments and documentation reviews can help identify outstanding compliance issues and improve preparation for the applicable statutory and security verification processes.

Official Regulatory Source

Panama Maritime Authority
General Directorate of Merchant Marine
Control and Compliance Department

Merchant Marine Circular MMC-359 – Guidance for the Implementation and Certification of the ISPS Code. Dated 29 May 2025.

Supersedes Merchant Marine Circular MMC-368.

Download the Official Panama MMC-359 Circular (PDF)

Further inquiries concerning the circular may be directed to the Maritime Ships Security Department, General Directorate of Merchant Marine, Panama Maritime Authority: [email protected].

Frequently Asked Questions

What is Panama Merchant Marine Circular MMC-359?

MMC-359 provides guidance issued by the Panama Maritime Authority for the implementation and certification of the International Ship and Port Facility Security Code. It establishes administrative requirements and responsibilities for operators, Company Security Officers and Recognized Security Organizations. It supersedes MMC-368.

Which vessels are covered by MMC-359?

MMC-359 applies to Panamanian-flagged vessels engaged on international voyages of 500 gross tonnage and upwards, as described in paragraph 4.1 of the circular.

Who is responsible for appointing the Company Security Officer?

The Company Operator must designate a Company Security Officer (CSO). The CSO must obtain a Declaration of Company Security Officer duly endorsed by the Panama Maritime Authority before the relevant initial, intermediate or renewal ISPS verification.

How often must the SSAS test be conducted?

The CSO must schedule an annual Ship Security Alert System test. MMC-359 requires the next SSAS test to be scheduled every 12 months. The RSO must verify the confirmation of the annual test during the applicable ISPS verification.

Which email address must be configured in the SSAS equipment?

According to paragraph 4.4.4, the SSAS equipment must be configured to the Panama Administration's email address [email protected], in accordance with MMC-133.

Who issues the Full Term International Ship Security Certificate?

The Full Term International Ship Security Certificate is issued exclusively by the Panama Maritime Authority after successful completion of the applicable initial or renewal verification. The RSO cannot issue the Full Term ISSC.

What is the validity of an Interim ISSC?

The Interim International Ship Security Certificate must be identified as Interim and its validity must not exceed six months, in accordance with ISPS Code Part A/19.4 and MMC-359.

When must intermediate ISPS verification be completed?

At least one intermediate verification must be conducted between the second and third anniversaries of the Full Term ISSC issuance date. MMC-359 expressly states that this verification window cannot be extended or postponed.

What is the renewal verification window?

Renewal verification takes place at intervals not exceeding five years and should be completed within three months before or after the existing certificate's expiry date, subject to the applicable provisions of ISPS Code Part A/19.3.

Is a Conformance Test Report required for Full Term ISSC issuance?

Yes. Starting 15 March 2025, paragraph 4.10.5 requires presentation of a valid Conformance Test Report for the issuance of the Full Term International Ship Security Certificate, in accordance with MMC-195.

What constitutes a major security failure under MMC-359?

The non-functioning of SSAS or LRIT equipment is considered a major failure. Such failures must be reported immediately to the Panama Maritime Authority, the Port Facility Security Officer and the competent authorities of relevant coastal States.

What happens when a minor security failure is identified?

The RSO must report the minor failure without delay to PMA. The report must include details of equivalent alternative security measures applied until the failure is rectified and an action plan specifying the timing of repair or replacement.

Can an RSO issue a Full Term ISSC?

No. Under MMC-359, Full Term ISSCs are issued exclusively by the Panama Maritime Authority. RSOs perform the applicable verification and endorsement functions but cannot issue the Full Term certificate or set the security level.

What happens if a vessel is out of service for more than six months?

An Interim Verification is required under ISPS Code Part A/19.4.2, in accordance with paragraph 4.14 of MMC-359. The applicable Annex 1 procedure must also be followed.

Can the vessel change its Recognized Security Organization?

Yes. MMC-359 provides for transfer of ISPS certification between RSOs. The change must be notified to the Panama Maritime Authority and the prescribed transfer procedure must be followed. Following successful verification, the gaining RSO endorses the existing ISSC.

Does MMC-359 recognize harmonized ISM and ISPS audits?

Yes. Paragraph 4.15 recognizes harmonized ISM and ISPS audits. Upon successful completion, the Safety Management Certificate and International Ship Security Certificate will have the same issuance and expiry dates.

Can the Full Term ISSC become invalid following a change of flag?

Yes. MMC-359 identifies a change of flag as a circumstance affecting certificate validity. Where a vessel is cancelled from the Panamanian Registry and immediately reflags again, the Company Operator must request reissuance of the Full Term ISSC through the E-Segumar platform.

Can PAMS provide independent ISPS compliance and technical support?

PAMS Pacific Admiralty Maritime Services provides independent marine surveying, technical inspections, regulatory compliance consultancy and audit preparation support for shipowners, operators and technical managers. PAMS can assist with independent compliance assessments and technical documentation reviews relating to applicable maritime regulatory requirements.

PAMS Pacific Admiralty Maritime Services

PAMS Pacific Admiralty Maritime Services is an independent marine technical consultancy specializing in marine surveying, technical engineering, marine inspections, regulatory compliance, maritime audits and offshore engineering consultancy.

PAMS provides independent technical consultancy support to shipowners, vessel operators, technical managers and offshore project stakeholders, including compliance assessments, technical inspections, survey preparation and regulatory documentation reviews.

Based in Malate, Manila, Philippines. Independent technical consultancy with Philippine and international service coverage.

Need Independent Maritime Compliance Support?

PAMS Pacific Admiralty Maritime Services provides independent marine surveying, technical inspection, engineering consultancy and regulatory compliance support for shipowners, operators and technical managers.

Back to content